Kyaot Calibration
Calibration Procedure
-
With Counter at zero, load truck or rail car and record weight.
Then run truck or rail car over scale and get actual scale weight.
-
Divide actual weight by test weight of product and K-factor.
This will give you counts or number of pockets for this weight.
-
Total weight divided by total counts or pockets gives pounds per
compartment. Divide this by test weight and you get the actual K-factor.
Most Used K-Factors (Bushels per compartment)
| Size |
K-Factor |
| #2.5 |
0.28 Bu |
| #10 |
1.03 Bu |
| #20 |
2.13 Bu |
| #40 |
6.6 Bu |
For more information, contact Bernie Lamb at 800-335-3026 or 651-646-8277
or fax at 651- 641-7234
Or contact Allied Equipment Sales by email at blamb@allied-equipment.com
Allied Equipment Sales, Inc.
1821 University Ave
Suite 171 N.
St. Paul, Minnesota
55104
USA