Test Weight Accessories

Allied Equipment Sales offers a Automatic Hydraulic Lift System. This is a multiple system and allows up to 6 scales on one power unit.

Each system consists of:

Hydraulic Power Unit with 2 horsepower explosion proof motor, pump and 10 gallon reservoir.
Hydraulic Cylinders with mounting brackets top and bottom four per scale.
One solenoid valve assembly, explosion proof with lock valve, lifts 4 at one time or 4 solenoids required to lift each corner separately.
Hydraulic fitting package one per set of four cylinders.
60 ft. of hydraulic hose.

Cast Iron Transport Caddy - 8 inch hard plastic wheel with 1600 pound capacity (2 swivel and 2 rigid), reinforced frame 3 in. by 3 in. by 0.5 in., connecting hitch (if required), and tandem units 4 ft. wheel centers.
Dust Covers - Canvas, fitted for each size.
Chain and Shackles (Linkage) - Used above weight and below bracket and or cylinder, includes turn buckle.
Manual or Cable Lifters - Available in all capacities under 3000 pounds.
Spreader Beams - Used for lifting two and three weights at one time.
Surveys - Engineering Survey on scale and test weight requirements
Self Contained Hydraulic Lifting Manual

Check out more information on Test Weights

For more information, contact Bernie Lamb at 800-335-3026 or 651-646-8277
or fax at 651- 641-7234

Or contact Allied Equipment Sales by email at blamb@allied-equipment.com

Allied Equipment Sales, Inc.
1821 University Ave
Suite 171 N.
St. Paul, Minnesota
55104
USA